5 Costly Bath Wall Panel Installation Mistakes in Canoga Park, CA

1. Installing Over Damaged Substrates

Risk:
Placing panels over moldy drywall, cracked tile, or water-damaged backer board traps moisture behind the wall.

Solution:
Remove compromised materials and confirm the surface is clean, dry, and structurally sound before installation.

2. Inadequate Adhesive Coverage

Risk:
Spot bonding instead of full adhesive spread causes panels to bulge or detach over time. This is one of the most frequent bath wall panel installation mistakes homeowners encounter.

Solution:
Use manufacturer-approved adhesive and apply it evenly across the entire panel for a secure bond.

3. Improper Sealing at Joints and Corners

Risk:
Using low-quality caulk or missing key sealing points allows water to seep behind panels, leading to mold and wood rot.

Solution:
Apply high-grade silicone to all seams, corners, and fixture penetrations to create a watertight barrier.

4. Ignoring Uneven Walls

Risk:
Older homes in Canoga Park often have walls that are not perfectly level. Installing panels without correcting alignment results in visible gaps and stress cracks.

Solution:
Level and prepare the framing before mounting panels to ensure proper alignment.

5. Poor Fixture Cutouts

Risk:
Sloppy cuts around shower heads and valves create small openings where moisture can enter behind the panels.

Solution:
Measure carefully and seal all plumbing penetrations thoroughly to prevent long-term water intrusion.